首页

板链流水线

板链线

板链线,板链流水线,板链输送线

b0811adbd1692619e365a37368b6ee15.jpg


板链线,板链流水线,板链输送线分为:重型板链流水线和轻型板链流水线。重型板链流水线有时也称为隔板流水线,它一般作为地面物流输送设备。重型板链流水线广泛适用于汽车、摩托车、家电(电视机、洗衣机、电冰箱等)、大型电器、机电等行业。重型板链流水线通常可与悬挂流水线、滚筒流水线、提升机等组成立体自动化生产线,充分利用各自的优点,以达到提高生产效率,降低劳动成本,确保产品质量的功效,是现代大型企业整厂自动化生产的组合形式。重型板链流水线输送链板材质有:不锈钢、碳钢、铝合金。机架材质通常用碳钢材料。

板链线,板链流水线,板链输送线工作原理:

  该机主要由头轮、尾轮、输送链、机壳及驱动装置等组成。输送链上每隔一定距离焊有对称的L型圆钢,用以带动物料。链式流水线工作时,机槽下部的链条向前运动,使机槽里物料内部压力增加,物料颗粒之间的内磨擦力随之增加,当物料的内磨擦力大于物料与机槽壁的外磨擦力时,物料便随着输送链一起向前作连续的整体运动。

板链线,板链流水线,板链输送线技术特点: 

  1.输送效率高物料在链式流水线的机槽内呈整体流动,因而较小的机槽空间可以输送大量的物料,设备的外形尺寸也相应较小。 

  2.能 耗低该机借助物料内磨擦力进行输送,输送链与机壳无磨擦运动。在同等输送量和较长输送距离的条件下,该机的电力消耗比螺旋流水线低40%左右。 

  3.故障率低输送链上的滚子在导轨上滚动,输送链与机壳无磨擦。链条采用合金钢热处理加工制成,其正常使用寿命3年左右,运行中故障率低。除头尾轴承外,流水线中无润滑点。


Plate chain line, plate chain assembly line, plate chain conveyor line are divided into: heavy plate chain assembly line and light plate chain assembly line. The heavy-duty plate chain assembly line is sometimes called the partition assembly line, and it is generally used as ground logistics transportation equipment. The heavy-duty plate chain assembly line is widely used in automobiles, motorcycles, home appliances (TVs, washing machines, refrigerators, etc.), large electrical appliances, electromechanical industries and other industries. The heavy-duty plate chain assembly line can usually be combined with the suspension assembly line, the drum assembly line, the hoist, etc. to form a three-dimensional automatic production line, and make full use of their respective advantages to achieve the effect of improving production efficiency, reducing labor costs, and ensuring product quality. It is the automation of modern large-scale enterprises. The combined form of production. Heavy-duty plate chain assembly line conveyor chain plates are made of stainless steel, carbon steel, and aluminum alloy. The frame material is usually carbon steel.


Working principle of plate chain line, plate chain assembly line, plate chain conveyor line:


  The machine is mainly composed of a head wheel, a tail wheel, a conveyor chain, a casing and a driving device. Symmetrical L-shaped round steel is welded at regular intervals on the conveyor chain to carry animal materials. When the chain assembly line is working, the chain at the bottom of the machine trough moves forward to increase the internal pressure of the material in the machine trough, and the internal friction between the material particles increases accordingly. When the internal friction of the material is greater than that between the material and the wall of the machine trough During friction, the material moves forward continuously along with the conveyor chain.


Technical characteristics of plate chain line, plate chain assembly line and plate chain conveyor line:


  1. The material with high conveying efficiency flows as a whole in the machine trough of the chain assembly line, so a small machine trough space can convey a large amount of materials, and the external dimensions of the equipment are correspondingly smaller.


  2. Low energy consumption The machine uses the friction force in the material to transport, and the conveyor chain and the casing move without friction. Under the conditions of the same conveying volume and longer conveying distance, the power consumption of this machine is about 40% lower than that of the spiral assembly line.


  3. Low failure rate The rollers on the conveyor chain roll on the guide rails, and there is no friction between the conveyor chain and the casing. The chain is made of alloy steel heat treatment, and its normal service life is about 3 years, and the failure rate during operation is low. Except for the head and tail bearings, there is no lubrication point in the assembly line.



上一篇: 流水线设备

下一篇: 没有了

相关标签:板链线